XBee Pro Module -Series S2C – 63mW with Wire Antenna – XBP24CZ7WIT-004

1,900.00 1,875.00

We now carry the Series 2 XBee (“ZigBee”) modules. This is the PRO Series 2 ZigBee protocol 63mW with wire antenna. It’s good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 – a “coordinator” module must be setup in the system, so they are not as plug-and-play. We suggest this module for those who are following to build Wireless Sensor Network on Series 2.

Out of stock

Email when stock available


Series 2 modules cannot talk to Series 1 modules, but Series1 firmware can be uploaded in the Series2. The S2C modules are not necessarily ‘better’ than S1 for many projects. They’re just different as they use the “ZigBee” wireless stack instead of the 802.15.4. This makes them better for low power usage and advanced users who want a mesh topology (many XBees in a spread-out configuration) – but they are more difficult to use for basic point-to-point setups. The pins on an XBee are 2mm spacing, not 0.1″ so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA, 3.3V DC regulator) or with the USB XBee adapter.


  • Indoor/Urban: up to 300 ft (90 m)
  • Outdoor line-of-sight: up to 2 miles (3200 m)



  • TX Peak Current: 205mA
  • RX Current: 47 mA (@3.3 V DC)
  • Power-down Current: < 3.5 μA
  • Transmit Power: 63mW (18dBm)
  • Receiver Sensitivity: -102 dBm



  • Remote Industrial Control and Monitoring
  • Long range remote control
  • Wireless data acquisition
  • Wireless networking
  • Detecting Forest Fires
  • Monitoring Road Conditions


Package Contains:

  • 1 X XBee Pro Module – Series S2C – 63mW with Wire Antenna – XBP24CZ7WIT-004

Additional information

Weight 0.010 kg
Dimensions 2.4 × 3.3 × 0.9 cm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.