BH1750FVI Digital Light intensity Sensor Module


BH1750 module is a digital ambient light sensor, IIC communication. It is good for light detection with Arduino. It is a light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations.

Out of stock

Email when stock available


This is a more accurate and easier to use version of the simple LDR which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the lux meter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1lx luminous flux in one square meter, their light intensity is 1lx. Sometimes to take good advantage of the illuminant, you can add a reflector to the illuminant. So that there will be more luminous flux in some directions and it can increase the illumination of the target surface.



  • Digital Light intensity detection module: GY-30 Chip : BH1750FVI
  • Light range 0-65535 lux
  • Direct digital output, bypassing the complex calculation, bypassing the calibration
  • Don’t distinguish between ambient light
  • Close to the spectral characteristics of visual acuity
  • Standard NXP I2C communication agreement
  • Light source dependency is little. (ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light)
  • Small measurement variation (+/- 20%)



  • Power supply: 3V DC – 5V DC
  • Sensor built-in: 16 bit AD converter
  • Widely use to 1-lux high precision measurement
  • Low Current by power down function – 50Hz / 60Hz Light noise reject-function



  • It is used in Robotics


Package Contains:

  • 1 X BH1750FVI Digital Light intensity Sensor Module

Additional information

Weight 0.010 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.