Sale!

30A Non-invasive AC Current Clamp Sensor – SCT-013-030

550.00 490.00

This current sensor can clamp around the supply line goes to the load of maximum 30A AC to measure the line current. This is very useful for practical application as well as for project purpose. This is small in size, light weight, can be attached easily with the microcontrollers for further processing with the measured current.

Out of stock

Email when stock available

Description

This noninvasive current sensor can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect AC current of up to 30A (recommended). Simply clip it around the current source that you wish to measure and it will produce a small amount of AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (looks like a headphone jack).

Features:

  • Light weight
  • Compact
  • Accuracy medium
  • Clamp on the wire to measure

 

Specifications:

  • Model: SCT-013-030
  • Core Material: Ferrite
  • External Material: Plastic
  • Input Current: 0-30A
  • Output Mode: 0-1V
  • Output Plug: 3.5mm
  • Dielectric Strength: 6000V AC/1min
  • Working Temperature: -25°C to 70°C
  • Cable Length: 1.18m / 45.4′

 

Application:

  • Energy monitor
  • Over-current protection device for an AC load

 

Package Contains:

  • 1 x Non-invasive AC Current Sensor

Additional information

Weight 0.065 kg
Dimensions 5.7 × 3.2 × 2.1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.